Skip to content

Braided Brake Hose & Brake Fittings

Braided Brake Hoses & Brake Fittings

Stainless steel braided brake hoses and the full range of end fittings to build them, made to order in the UK by BRT Motorsport. Every hose is built to your specified length, colour and fitting combination.

Rubber brake hoses expand under pressure. That expansion is what gives an older car its soft, vague pedal: some of the force you apply at the pedal goes into swelling the hose rather than clamping the pads. A PTFE-lined hose inside a stainless braid doesn't expand, so pedal feel is firmer, more consistent, and doesn't deteriorate as the fluid heats up on track.

Hose specification

  • PTFE inner core — chemically inert, unaffected by brake fluid, and dimensionally stable under heat. 3mm (1/8") internal diameter
  • Stainless steel outer braid, PVC coated and wipe-clean — resists abrasion, stone chips and corrosion. 8mm (5/16") outside diameter
  • 4,206 PSI (290 bar) maximum working pressure, 12,618 PSI (870 bar) burst pressure
  • Operating temperature −70°C to 250°C (−94°F to 482°F)
  • Minimum bend radius 19mm — worth checking before you commit to a tight routing
  • Nine colours — red, blue, black, yellow, orange, green, purple, carbon and clear braid
  • Built to order, from 80mm to 8,000mm
  • Fittings in 303/304 stainless steel, made in Great Britain

Identifying the fitting you need

Most people come here knowing they need a hose and not knowing which end fittings. Four things determine it:

Thread size and pitch. The common brake threads are M10x1, M10x1.25, M10x1.5, M12x1, M12x1.25, M12x1.5, 3/8" UNF, 7/16"x20, 7/16"x24 and 1/8" BSP. M10x1 is by far the most common on European cars. Thread pitch matters as much as diameter — an M10x1 will start to thread into an M10x1.25 port and then bind.

Male or female. A male fitting has the external thread and screws into a port. A female fitting has an internal thread and receives a male union.

Fixed or swivel. A swivel nut rotates freely on the hose end, letting you align the hose without twisting it during installation. A fixed fitting doesn't, so the hose must be routed to suit. Swivel is easier to fit in almost every case.

Circlip groove or plain. Many VAG, Ford, Renault and Toyota calipers locate the hose with a circlip or horseshoe clip that sits in a machined groove on the fitting. If your original hose has a clip retaining it at the caliper or chassis bracket, you need a circlip groove fitting rather than a plain one.

What's in this collection

  • Banjo hose ends — M8, M10 3/8", M12 and 7/16", including extended and double-exit banjos. The extended M10 3/8" banjo also comes in 20°, 45° and 90° side bends for lateral exits
  • Male fittings — fixed and swivel nut, in M10x1, M10x1.25, M12x1, 3/8" UNF, 7/16"x20 and 7/16"x24
  • Female fittings — swivel nut, fixed and square swivel, in M10x1, M10x1.25, M12x1, M12x1.25, M12x1.5, 3/8" UNF, 7/16"x20 and 1/8" BSP
  • Circlip groove females — including 17mm and 19mm hex, milled flat, and VAG, Ford, Porsche and Toyota specific patterns
  • Bulkhead fittings and lock nuts — M10x1, M16 external, 3/8" UNF and 7/16", for chassis pass-throughs
  • Clutch fittings — Audi, BMW, Ford, Renault and Renault Mégane push-in connectors, plus adapters converting an OE push-in clutch fitting to M10x1 male or female
  • Inline fittings — tee piece and swaged 90° elbow, for splitting or turning a line mid-run
  • Braided hose by the millimetre — in all nine colours

Inline and specialist fittings

Beyond the end fittings, a few parts solve specific problems:

  • AN3 quick release dry break coupling — £32.99, stainless steel or aluminium. Both halves seal as they separate, so a line can be disconnected and reconnected without draining the system or drawing air in. Worth having where something comes apart regularly — removable steering, quick-change assemblies, trackside servicing
  • Brake hose tee piece — £20.95, crimped stainless. Splits one line into two mid-run without needing a bulkhead union
  • Brake hose swaged elbow — £19.98, stainless 90°. For turning a line where there is no room for a bend radius
  • Heat protection sleeve — £14.75 per metre. Slides over the braid to shield a hose routed near an exhaust or turbo. Note this is sold per metre, while the hose itself is priced per millimetre
  • 3/8" x 24 UNF banjo brake light switch — £12.95. A direct replacement for the standard master cylinder brake switch, mounting on a banjo port

Building a custom hose

Use our Custom Brake Hose Builder to specify both ends, the angle at each end, colour and exact length, and we'll build it. Straight, 20°, 45° and 90° bends are available on most fittings.

Not sure what you need?

Send us a photo of your existing hose ends, or your vehicle Make & Model, and we'll identify the fittings for you before you order. We build these daily and can usually tell from a picture.

Related: brake fitting adaptors, banjo bolts, copper washers, hose locators.

Filters

Brake Hose Blue
Brake Hose Red
£0.01 - £0.01
£0.01
£0.01 - £0.01
£0.01

Braided Brake Hose

BRT Motorsport
In stock

BRT Motorsport Braided Brake Hose Upgrade your braking system with our stainless steel braided brake hose — engineered for performance vehicles whe...

View full details
£0.01 - £0.01
£0.01
£0.01 - £0.01
£0.01
8mm banjo 20°
M8 Banjo Hose End
£6.55 - £6.55
£6.55
£6.55 - £6.55
£6.55

M8 Banjo Hose End

BRT Motorsport

M8 Banjo Hose End – Stainless Steel Brake Fitting A precision-machined M8 stainless steel banjo hose end designed for use with AN3 braided brake ho...

View full details
£6.55 - £6.55
£6.55
£6.55 - £6.55
£6.55
M10 & 3 8" Banjo Hose End
M10 Straight Banjo Hose End
£5.05 - £5.05
£5.05
£5.05 - £5.05
£5.05

M10 3/8" Banjo Hose End

BRT Motorsport

M10 3/8" Banjo Hose End – Stainless Steel Brake Fitting A precision-machined M10 3/8" stainless steel banjo hose end built for use with AN3 braided...

View full details
£5.05 - £5.05
£5.05
£5.05 - £5.05
£5.05
M10 Extended Banjo
M10 3/8" Extended Banjo Hose End
£8.65 - £8.65
£8.65
£8.65 - £8.65
£8.65

M10 3/8" Extended Banjo Hose End

BRT Motorsport

M10 3/8" Extended Banjo Hose End – Stainless Steel Brake Fitting When standard banjo fittings won't reach, the M10 3/8" extended banjo hose end giv...

View full details
£8.65 - £8.65
£8.65
£8.65 - £8.65
£8.65
Double Exit Banjo
£12.28 - £12.28
£12.28
£12.28 - £12.28
£12.28

Double Exit Banjo

BRT Motorsport

Double Exit Banjo – Stainless Steel Brake Fitting The double exit banjo is the go-to solution when you need to split a single brake line into two o...

View full details
£12.28 - £12.28
£12.28
£12.28 - £12.28
£12.28
8mm banjo 20°
12mm Banjo
£6.45 - £6.45
£6.45
£6.45 - £6.45
£6.45

M12 Banjo Hose End

BRT Motorsport

M12 Banjo Hose End – Stainless Steel Brake Fitting A precision-machined M12 stainless steel banjo hose end designed for use with AN3 braided brake ...

View full details
£6.45 - £6.45
£6.45
£6.45 - £6.45
£6.45
8mm banjo 20°
7 16" Banjo Hose End
£6.45 - £6.45
£6.45
£6.45 - £6.45
£6.45

7/16" Banjo Hose End

BRT Motorsport

7/16" Banjo Hose End – Stainless Steel Brake Fitting A precision-machined 7/16" stainless steel banjo hose end designed for use with AN3 braided br...

View full details
£6.45 - £6.45
£6.45
£6.45 - £6.45
£6.45
M10x1 Fixed Male
M10x1 Fixed Male
£5.79 - £5.79
£5.79
£5.79 - £5.79
£5.79

M10x1 Fixed Male

BRT Motorsport

M10x1 Fixed Male – Stainless Steel Brake Hose Fitting The M10x1 fixed male fitting is a straight, non-adjustable end fitting designed for use with ...

View full details
£5.79 - £5.79
£5.79
£5.79 - £5.79
£5.79
M10x1 Fixed Male Bulkhead
M10x1 Fixed Male Bulkhead
£6.49 - £6.49
£6.49
£6.49 - £6.49
£6.49

M10x1 Fixed Male Bulkhead

BRT Motorsport

M10x1 Fixed Male Bulkhead – Stainless Steel Brake Hose Fitting The M10x1 fixed male bulkhead fitting is designed for routing braided brake hose cle...

View full details
£6.49 - £6.49
£6.49
£6.49 - £6.49
£6.49
M10 x 1 Extended Fixed Male Bulkhead
M10x1 Extended Fixed Male Bulkhead
£6.65 - £6.65
£6.65
£6.65 - £6.65
£6.65

M10x1 Extended Fixed Male Bulkhead

BRT Motorsport

M10x1 Extended Fixed Male Bulkhead – Stainless Steel Brake Hose Fitting The M10x1 extended fixed male bulkhead offers additional thread length over...

View full details
£6.65 - £6.65
£6.65
£6.65 - £6.65
£6.65
M10x1 Male Swivel Nut
M10x1 Male Swivel Nut
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68

M10x1 Male Swivel Nut

BRT Motorsport

M10x1 Male Swivel Nut – Stainless Steel Brake Hose Fitting The M10x1 male swivel nut is a end fitting for AN3 braided brake hose, allowing the hose...

View full details
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68
M10x1.25 Male Swivel Nut
M10x1.25 Male Swivel Nut
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68

M10x1.25 Male Swivel Nut

BRT Motorsport

M10x1.25 Male Swivel Nut – Stainless Steel Brake Hose Fitting The M10x1.25 male swivel nut is a end fitting for AN3 braided brake hose, allowing th...

View full details
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68
Male Bulkhead Circlip Groove Ford
Male Bulkhead Circlip Groove Ford
£9.08 - £9.08
£9.08
£9.08 - £9.08
£9.08

Male Bulkhead Circlip Groove Ford

BRT Motorsport

Male Bulkhead Circlip Groove Ford – Stainless Steel Brake Hose Fitting The male bulkhead circlip groove Ford fitting is a specialist brake hose end...

View full details
£9.08 - £9.08
£9.08
£9.08 - £9.08
£9.08
M10x1 Female Swivel Nut
M10x1 Female Swivel Nut
£6.98 - £8.75
£6.98 - £8.75
£6.98 - £8.75
£6.98

M10x1 Female Swivel Nut

BRT Motorsport

M10x1 Female Swivel Nut – Stainless Steel Brake Hose Fitting The M10x1 female swivel nut is a end fitting for AN3 braided brake hose, designed to c...

View full details
£6.98 - £8.75
£6.98 - £8.75
£6.98 - £8.75
£6.98
M10x1.25 Female Swivel Nut
M10x1.25 Female Swivel Nut
£6.98 - £8.75
£6.98 - £8.75
£6.98 - £8.75
£6.98

M10x1.25 Female Swivel Nut

BRT Motorsport

M10x1.25 Female Swivel Nut – Stainless Steel Brake Hose Fitting The M10x1.25 female swivel nut is a end fitting for AN3 braided brake hose, designe...

View full details
£6.98 - £8.75
£6.98 - £8.75
£6.98 - £8.75
£6.98
M10x1 Female Nut
M10x1 Female Nut
£6.75 - £6.75
£6.75
£6.75 - £6.75
£6.75

M10x1 Female Nut

BRT Motorsport

M10x1 Female Nut – Stainless Steel Brake Hose Fitting The M10x1 female nut is a straight end fitting for AN3 braided brake hose, designed to connec...

View full details
£6.75 - £6.75
£6.75
£6.75 - £6.75
£6.75
M10x1 Square Swivel Female
M10x1 Square Swivel Female
£6.75 - £6.75
£6.75
£6.75 - £6.75
£6.75

M10x1 Square Swivel Female

BRT Motorsport

M10x1 Square Swivel Female – Stainless Steel Brake Hose Fitting The M10x1 square swivel female fitting is a straight end fitting for AN3 braided br...

View full details
£6.75 - £6.75
£6.75
£6.75 - £6.75
£6.75
M10x1 Circlip Groove Swivel Female
M10x1 Circlip Groove Swivel Female
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

M10x1 Circlip Groove Swivel Female 17mm Hex

BRT Motorsport

M10x1 Circlip Groove Swivel Female 17mm Hex – Stainless Steel Brake Hose Fitting The M10x1 circlip groove swivel female fitting is a specialist bra...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
M10x1 Circlip Groove Swivel Female 19mm Hex
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

M10x1 Circlip Groove Swivel Female 19mm Hex

BRT Motorsport

M10x1 Circlip Groove Swivel Female 19mm Hex – Stainless Steel Brake Hose Fitting The M10x1 circlip groove swivel female 19mm hex fitting is a speci...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
M10x1.25 Circlip Groove Swivel Female
M10x1.25 Circlip Groove Swivel Female
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

M10x1.25 Circlip Groove Swivel Female

BRT Motorsport

M10x1.25 Circlip Groove Swivel Female – Stainless Steel Brake Hose Fitting The M10x1.25 circlip groove swivel female fitting is a specialist brake ...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
M10x1.5 Circlip Groove Swivel Female
M10x1.5 Circlip Groove Swivel Female
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

M10x1.5 Circlip Groove Swivel Female

BRT Motorsport

M10x1.5 Circlip Groove Swivel Female – Stainless Steel Brake Hose Fitting The M10x1.5 circlip groove swivel female fitting is a specialist brake ho...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
M10x1 Female Circlip Groove With Milled Flat
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

M10x1 Female Circlip Groove With Milled Flat

BRT Motorsport

M10x1 Female Circlip Groove With Milled Flat – Stainless Steel Brake Hose Fitting The M10x1 female circlip groove fitting with milled flat is a spe...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
M10x1 Female Circlip Groove Swivel Vag / Ford BRT Motorsport
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

M10x1 Female Circlip Groove Swivel Vag / Ford

BRT Motorsport

M10x1 Female Circlip Groove Swivel VAG / Ford – Stainless Steel Brake Hose Fitting The M10x1 female circlip groove swivel fitting for VAG and Ford ...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
Toyota Circlip Female M10x1
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

Toyota Circlip Female M10x1

BRT Motorsport

Toyota Circlip Female M10x1 – Stainless Steel Brake Hose Fitting The Toyota circlip female M10x1 fitting is a vehicle-specific brake hose end desig...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
Fixed Female M10x1 Porsche Vag
Fixed Female M10x1 Porsche Vag
£9.49 - £9.49
£9.49
£9.49 - £9.49
£9.49

Fixed Female M10x1 Porsche Vag

BRT Motorsport

Fixed Female M10x1 Porsche VAG – Stainless Steel Brake Hose Fitting The fixed female M10x1 Porsche VAG fitting is a vehicle-specific straight brake...

View full details
£9.49 - £9.49
£9.49
£9.49 - £9.49
£9.49
M10x1 Swivel Female Bulkhead Fitting
M10x1 Swivel Female Bulkhead Fitting
£8.75 - £8.75
£8.75
£8.75 - £8.75
£8.75

M10x1 Swivel Female Bulkhead Fitting

BRT Motorsport

M10x1 Swivel Female Bulkhead Fitting – Stainless Steel Brake Hose Fitting The M10x1 swivel female bulkhead fitting is designed for routing AN3 brai...

View full details
£8.75 - £8.75
£8.75
£8.75 - £8.75
£8.75
M12x1 Male Swivel Nut
M12x1 Male Swivel Nut
£6.25 - £12.49
£6.25 - £12.49
£6.25 - £12.49
£6.25

M12x1 Male Swivel Nut

BRT Motorsport

M12x1 Male Swivel Nut – Stainless Steel Brake Hose Fitting The M12x1 male swivel nut is a end fitting for AN3 braided brake hose, allowing the hose...

View full details
£6.25 - £12.49
£6.25 - £12.49
£6.25 - £12.49
£6.25
M12 Female For -3 Hose
M12 Female For -3 Hose
£11.08 - £12.30
£11.08 - £12.30
£11.08 - £12.30
£11.08

M12x1 Female For -3 Hose

BRT Motorsport

M12x1 Female Swivel Nut – Stainless Steel Brake Hose Fitting for AN3 (-3) Hose The M12x1 female swivel nut is a end fitting for AN3 (-3) braided br...

View full details
£11.08 - £12.30
£11.08 - £12.30
£11.08 - £12.30
£11.08
M12 Female For -3 Hose
M12 Female For -3 Hose
£11.08 - £12.30
£11.08 - £12.30
£11.08 - £12.30
£11.08

M12x1.25 Female For -3 Hose

BRT Motorsport
In stock

M12x1.25 Female Swivel Nut – Stainless Steel Brake Hose Fitting for AN3 (-3) Hose The M12x1.25 female swivel nut is a end fitting for AN3 (-3) brai...

View full details
£11.08 - £12.30
£11.08 - £12.30
£11.08 - £12.30
£11.08
M12 Female For -3 Hose
M12 Female For -3 Hose
£11.08 - £12.30
£11.08 - £12.30
£11.08 - £12.30
£11.08

M12x1.5 Female For -3 Hose

BRT Motorsport
In stock

M12x1.5 Female Swivel Nut – Stainless Steel Brake Hose Fitting for AN3 (-3) Hose The M12x1.5 female swivel nut is a end fitting for AN3 (-3) braide...

View full details
£11.08 - £12.30
£11.08 - £12.30
£11.08 - £12.30
£11.08
3/8" UNF Fixed Male
£5.79 - £5.79
£5.79
£5.79 - £5.79
£5.79

3/8" UNF Fixed Male

BRT Motorsport

3/8" UNF Fixed Male – Stainless Steel Brake Hose Fitting The 3/8" UNF fixed male fitting is a straight, non-adjustable end fitting for AN3 braided ...

View full details
£5.79 - £5.79
£5.79
£5.79 - £5.79
£5.79
-3 3 8" UNF Fixed Male Bulkhead
-3 3 8" UNF Fixed Male Bulkhead
£6.49 - £6.49
£6.49
£6.49 - £6.49
£6.49

3/8" UNF Fixed Male Bulkhead

BRT Motorsport

3/8" UNF Fixed Male Bulkhead – Stainless Steel Brake Hose Fitting The 3/8" UNF fixed male bulkhead fitting is designed for routing AN3 braided brak...

View full details
£6.49 - £6.49
£6.49
£6.49 - £6.49
£6.49
-3 3 8" UNF Male Swivel Nut
-3 3 8" UNF Male Swivel Nut
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68

3/8" UNF Male Swivel Nut

BRT Motorsport

3/8" UNF Male Swivel Nut – Stainless Steel Brake Hose Fitting The 3/8" UNF male swivel nut is a end fitting for AN3 braided brake hose, allowing th...

View full details
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68
-3 3 8" UNF Female Swivel Nut
-3 3 8" UNF Female Swivel Nut
£6.98 - £8.75
£6.98 - £8.75
£6.98 - £8.75
£6.98

3/8" UNF Female Swivel Nut

BRT Motorsport

3/8" UNF Female Swivel Nut – Stainless Steel Brake Hose Fitting The 3/8" UNF female swivel nut is a adjustable end fitting for AN3 braided brake ho...

View full details
£6.98 - £8.75
£6.98 - £8.75
£6.98 - £8.75
£6.98
3 8" UNF Circlip Groove Swivel Female
3 8" UNF Circlip Groove Swivel Female
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

3/8" UNF Circlip Groove Swivel Female

BRT Motorsport

3/8" UNF Circlip Groove Swivel Female – Stainless Steel Brake Hose Fitting The 3/8" UNF circlip groove swivel female fitting is a specialist brake ...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
Female Internal M10x1 / M16 External Bulkhead
Female Internal M10x1 / M16 External Bulkhead
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

Female Internal M10x1 M16 External Bulkhead

BRT Motorsport

Female Internal M10x1 / M16 External Bulkhead – Stainless Steel Brake Hose Fitting The female internal M10x1 / M16 external bulkhead fitting is a d...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
Female Internal 3 8"x24 M16 External Bulkhead
Female Internal 3 8"x24 M16 External Bulkhead
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95

Female Internal 3/8"x24 M16 External Bulkhead

BRT Motorsport

Female Internal 3/8"x24 / M16 External Bulkhead – Stainless Steel Brake Hose Fitting The female internal 3/8"x24 / M16 external bulkhead fitting is...

View full details
£7.95 - £7.95
£7.95
£7.95 - £7.95
£7.95
7 16" x 20 Female Swivel Nut
7 16" x 20 Female Swivel Nut
£9.95 - £10.98
£9.95 - £10.98
£9.95 - £10.98
£9.95

7/16" x 20 Female Swivel Nut

BRT Motorsport

7/16" x 20 Female Swivel Nut – Stainless Steel Brake Hose Fitting The 7/16" x 20 female swivel nut is a end fitting for AN3 braided brake hose, des...

View full details
£9.95 - £10.98
£9.95 - £10.98
£9.95 - £10.98
£9.95
7/16 x 24 Circlip Groove Swivel Female
£8.95 - £8.95
£8.95
£8.95 - £8.95
£8.95

7/16 x 24 Circlip Groove Swivel Female

BRT Motorsport

7/16" x 24 Circlip Groove Swivel Female – Brake Hose Fitting The 7/16" x 24 circlip groove swivel female fitting is a specialist brake hose end for...

View full details
£8.95 - £8.95
£8.95
£8.95 - £8.95
£8.95
7 16"x20 Male Swivel Nut
7/16"x20 Male Swivel Nut
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68

7/16"x20 Male Swivel Nut

BRT Motorsport

7/16" x 20 Male Swivel Nut – Stainless Steel Brake Hose Fitting The 7/16" x 20 male swivel nut is a end fitting for AN3 braided brake hose, allowin...

View full details
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68
7/16 Bulkhead Fitting For -3 Hose
£6.56 - £6.56
£6.56
£6.56 - £6.56
£6.56

7/16 x 20 Bulkhead Fitting For -3 Hose

BRT Motorsport

7/16" x 20 Fixed Male Bulkhead Fitting – Stainless Steel Brake Hose Fitting The 7/16" x 20 fixed male bulkhead fitting is designed for routing AN3 ...

View full details
£6.56 - £6.56
£6.56
£6.56 - £6.56
£6.56
7/16 Bulkhead Lock Nut
£1.25 - £1.25
£1.25
£1.25 - £1.25
£1.25

7/16 Bulkhead Lock Nut

BRT Motorsport
In stock

7/16" x 20 Bulkhead Lock Nut – Stainless Steel The 7/16" x 20 bulkhead lock nut is used to secure a 7/16" x 20 UNF bulkhead fitting through a panel...

View full details
£1.25 - £1.25
£1.25
£1.25 - £1.25
£1.25
7/16" x 24 Male Swivel Nut 90°
7/16x24 Male Swivel Nut
£14.20 - £14.20
£14.20
£14.20 - £14.20
£14.20

7/16x24 Male Swivel Nut

BRT Motorsport

7/16" x 24 Male Swivel Nut – Brake Hose Fitting The 7/16" x 24 male swivel nut is a end fitting for AN3 braided brake hose, allowing the hose end t...

View full details
£14.20 - £14.20
£14.20
£14.20 - £14.20
£14.20
1 8" BSP Female Swivel Nut
1 8" BSP Female Swivel Nut
£6.98 - £8.75
£6.98 - £8.75
£6.98 - £8.75
£6.98

1/8" BSP Female Swivel Nut

BRT Motorsport

1/8" BSP Female Swivel Nut – Stainless Steel Brake Hose Fitting The 1/8" BSP female swivel nut is end fitting for AN3 braided brake hose, designed ...

View full details
£6.98 - £8.75
£6.98 - £8.75
£6.98 - £8.75
£6.98
1 8" BSP Male Tube Nut
1 8" BSP Male Tube Nut
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68

1/8" BSP Male Tube Nut

BRT Motorsport

1/8" BSP Male Tube Nut – Stainless Steel Brake Hose Fitting The 1/8" BSP male tube nut is a end fitting for AN3 braided brake hose, designed to con...

View full details
£5.68 - £11.85
£5.68 - £11.85
£5.68 - £11.85
£5.68
Audi 1 Clutch Fitting
£9.45 - £9.45
£9.45
£9.45 - £9.45
£9.45

Audi 1 Clutch Fitting

BRT Motorsport
In stock

Audi 1 Clutch Fitting – Stainless Steel Braided Hose Fitting The Audi 1 clutch fitting is a vehicle-specific stainless steel end fitting designed f...

View full details
£9.45 - £9.45
£9.45
£9.45 - £9.45
£9.45
Audi 2 Clutch Fitting
£9.45 - £9.45
£9.45
£9.45 - £9.45
£9.45

Audi 2 Clutch Fitting

BRT Motorsport
In stock

Audi 2 Clutch Fitting – Stainless Steel Braided Hose Fitting The Audi 2 clutch fitting is a vehicle-specific stainless steel end fitting designed f...

View full details
£9.45 - £9.45
£9.45
£9.45 - £9.45
£9.45
BMW Evo Audi Megane Clutch Hose Fitting
£9.45 - £9.45
£9.45
£9.45 - £9.45
£9.45

BMW Evo Megane Clutch Fitting

BRT Motorsport
In stock

BMW / Evo / Megane Clutch Fitting – Stainless Steel Braided Hose Fitting The BMW / Evo / Megane clutch fitting is a vehicle-specific stainless stee...

View full details
£9.45 - £9.45
£9.45
£9.45 - £9.45
£9.45